Web Articles

By Todd Lange

Drug addiction is a serious issue in most parts of the US; however, there are several treatment options for those who wish to find a solution to their problem. Families are intervening admirably to get addicted persons into suitable treatment modes, out of which the rehab treatment is the most popular mode. Rehab is short for rehabilitation, which is almost a surefire method of treatment for drug addiction. However, people have several questions about deciding on a rehab treatment option. Here we look into those questions and see some answers for them.

Q1. What does the rehab treatment program actually try to do?

In some parts of the world, rehab treatment is intended to bring people from a higher state of addiction to a lower state of addiction that does not pose as many risks to them. But, in the US, rehab treatment implies a complete abstinence from the substance. The aim of the rehab treatment program in any place within the US is to cure the person completely from the addiction.

Q2. What are the main parts of the rehab treatment program?

There are four main parts to any rehab program. The first part is an analysis of the patient’’s condition. This is done through physical tests on the patient as well as interviewing them. These tests indicate how well-suited the patient is to go through the treatment and if other methods of treatment need to be employed. The second stage is the intervention. Here, the patient is convinced to get into treatment. This is usually already done before the patient gets into the rehab center, but there are cases in which people will relapse into denial when they are actually into the rehab center. Hence, the convincing and the motivating become important. This can be done by employing the help of the family of the patient who can be trained on conducting the intervention program in the right manner.

The third part of the program is the detox. The detox is needed in almost all cases that enter for rehab treatment. The main aspect here is to purge the person’’s body from the toxins that might have accumulated in it due to the use of the addictive substance. This can be a very long process. Its length will mainly depend on what kind of substance the person is addicted to and the physical and mental situation of the patient.

After the detox, the patient is led through the aftercare program. This is an elaborate program that includes maintenance medication, counseling and group education. There are various therapies taught to the patient which help keep them out of the dependency on the substance.

Q3. Are there any outpatient rehab programs?

The very concept of the rehab treatment program implies that it must be done on an isolated basis where the patient must be removed for a while from all familiar circumstances. Even people who are quite close to the patient are not encouraged to meet them because looking at a familiar person may trigger the temptation for the substance in them, because addiction works in a large way through association. For this reason, it is necessary that the patient lives in the rehab treatment center. That is the reason there are no outpatient rehab programs.

However, there are other kinds of treatment programs that can be provided on an outpatient basis. The outpatient treatment program and the day treatment program are examples of these. Here the patient continues living at home but has to visit the center for a few times a week (daily in the day program) and receive the treatment. If a detox is needed, it is carried out on an outpatient basis too. But, it must be remembered that such a program will work only if the person is in a mild stage of the addiction. For people severely dependent on a substance, inpatient rehab is the best treatment option.

Q4. On what factors will the length of the rehab treatment depend?

People are always quite curious about how much time they will have to spend in the rehab center. Though there is no fixed time for this, it must be said that the length of time will actually depend on how addicted the person is to the substance and the general physical and mental constitution of the patient. The withdrawal that the patient will face will depend on these things and that is what will decide the nature and the duration of the aftercare program. One more factor on which this depends is the type of the substance that the person is addicted too. Someone undergoing a rehab treatment for marijuana addiction will spend much less time at the center than someone for heroin addiction treatment.

About The Author

You may visit http://www.treatment-addiction.org to read more articles like this one on rehab treatment and on related issues.

By Todd Lange

A heroin addiction is definitely one of the most dreaded kinds of addiction, the only solace being that there are various methods of treatment for it. However, it is not quite so easy to plan out a heroin addiction treatment. Here are some things that you need to keep in mind.

All Heroin Addiction Treatment Programs are not the Same

One of the primary things that you must know is that there is widespread difference in the ways treatment centers implement programs for removing a heroin dependency. Even if on the face of it these methods may seem to be the same, there are various subtle differences. Like, there may be different ways in which the detox treatment program is implemented. The mode in which the medications are provided may be different. The nursing care may be 24/7 in one center while it may be only for a few hours in some other center. Some center may be using conventional methods for treatment while some will use holistic approaches.

In this way, no two programs for heroin addiction will be the same. You need to check out the websites of the centers in thorough detail so that you know what you are getting. If you are planning the treatment for someone, you have to keep the requirements of that person in mind and then proceed. This will ensure that the program is suitable for the person’’s needs.

Select the Right Medicinal Approach for the Treatment

You must know that there are two main kinds of medication therapies used for heroin addiction treatment. One of them uses methadone while the other uses buprenorphine. Methadone is a very old kind of medication which is still considered to be quite potent. It is an opioid like heroin itself, and as long as it is taken, the person does not feel the urge for the substance. But methadone needs to be provided in an inpatient setting only because it is habit forming also, and if the dosage is suddenly reduced or stopped completely, the patient will feel a withdrawal for methadone itself.

Buprenorphine is a newer method of heroin treatment and is widely employed in most treatment centers today. It works on the same principles that methadone does but it is not as habit forming as methadone is and hence it can be administered in a somewhat liberal manner. It can be used in outpatient treatment programs for heroin. However, there is some criticism on buprenorphine because it is a milder form of treatment.

You have to research on the options well and then see which medication will be suitable for the patient. The form the treatment will take and also the expenses will depend on what medication the treatment center will be using.

Check the Licenses and Other Qualifying Information for the Center

It is absolutely important that every addiction treatment center in the US must be licensed through the state they are operating in. But with heroin addiction treatment, the requirements are more stringent. Here it is necessary that the center has a special license for heroin addiction treatment. You have to check this information either on the website of the center or, if it is not mentioned there, by calling them up at the number on the website.

Additionally, it is wise to check whether the treatment providers are qualified or not. You may want to check their qualifications. It is ideal if they are qualified through a national organization like the American Society of Addiction Medicine. It is also a good idea to see their experience in dealing with heroin addiction treatment.

Next, check the accreditations that the treatment center has. If the center is accredited through a state or a national organization, it reflects positively on the genuineness of their programs. Check also what kind of affiliates they have. More affiliates mean they are a well-supported and well-networked program. In that case, if there is some difficulty, they can ask for help from each other.

Get in Touch with your Insurance Company

This is a point that most people forget to consider. But, insurance companies will not cover for all kinds of treatment. There are some centers that they will not consider. Your best bet is to speak to them at length before considering the treatment program and go ahead with it only if they are willing to provide the necessary cover. If they are not doing that, you can ask them to suggest some centers within their network and then you can see whether you would wish to use them.

About The Author

You may visit http://www.treatment-addiction.org to read more articles like this one on heroin addiction treatment and on related issues.

By Paul Hata

Ever wonder what goes inside a busy day of an entrepreneur living up to his entrepreneurial functions and activities? Basically, a lot.

The very first thing that would enter his mind when he wakes up in the morning is how to show efficiency and effectiveness to the client the benefit of his presentation. Then he would walk into his office and meet with them.

He would emphasize the importance of patronizing his ideas. When they shook hands with it, an entrepreneur knows that’’s the start of a brand new day.

But meeting up with the expectations is not all that there is. An entrepreneur’’s responsibility doesn”t stop there. He’’s mind should always think beyond the unthinkable and recheck his assets to support it. The cost is great but the risks are greater. An entrepreneur not only sacrifices his reputation at stake but also his trust fund.

In summary, there are only 3 important daily routines an entrepreneur incorporates with his life: Organize, coordinate and mobilize. He must have the ability to balance all three because when one is lost, the others might be compromised.

Organizing includes creativity, innovativeness and strategy of pulling it altogether. The spirit of a true warrior has to be present. He is knowledgeable that a positive attitude and the will to walk the extra mile with no hesitation would gain much profit. He always does his research, gather data, and think of ways on how to expand his own establishment.

Coordinating means communicating. Explaining the pros and cons. Talking to people who can supply resources like raw materials, facilities, and machineries needed for the business to get on its track. A blurry conversation between the entrepreneur and the supplier would affect the rate and quality of production.

Mobilizing the people who works wholeheartedly for him must also be prioritized. An iron hand always gets a business into trouble. He adds benefits. He knows that what he needs is similar to what his laborers need. This is crucial to establish one big happy working environment.

These activities must be balanced. One thing lacks or exceeds, the whole process messes up. His functions are elaborated more.

The function to think

-Think of numerous possibilities beyond human expectation
-Think of who needs what
-Think of how to handle a question or a problem by providing different possible answers
-Making decisions without the fear of being crucified the moment he mess things up
-Think of how much everything would cost
-Think of how much he would profit
-Think of what others might not think
-Elaborates and explains to further understanding

The function to act
- Act according to his plans
- Act that exceeds to what is expected
- Act with passion and charisma
- Act giving pride to the phrase 1% inspiration,
99% perspiration
-Act bearing the dignity, respect and trust
-Act like the world owes you big time
-Act like no one has acted before

If all of these functions seem easy for you to conjure, then your good to go. But if situations and predicaments are holding you back, you are bound to fail. Remember, balance in everything is how you and others benefit. Function as you are expected to function and find glory in it.

About The Author

1000s of Career,Employment,Income,Jobs & Recruitment.Click Here -
- http://www.worldcareerpages.com, http://www.worldemploymentpages.com,
http://www.worldincomepages.com and http://worldrecruitmentpages.com

By Paul Hata

There is a bit of a misperception about the phrase “public speaking”. The misperception that the technique of becoming good at public speaking is all in how you speak. The truth is that your voice is only part of what you need to be successful in giving a presentation to a group of people.

To be an effective public “speaker”, you should use every resource you have including your body language, your arms and your legs to capture the attention of the crowd and hold it.

There is nothing more boring than a speaker who stands in one place and never moves his arms and speaks softly just putting out the information of the talk. So to avoid this curse, learn not only to communicate with your entire being when you are in front of an audience.

Learn to express yourself with facial expressions, with gestures of your arms and with movement. Because that extra effort is what can make a fair presentation good or a good presentation a great one.

A good public presentation can be compared to eating a meal in a restaurant. A good chef knows that there is more to fine dining than just food because you also must have good service and ambiance so the presentation of the food makes the meal delightful to eat.

The same is true of a public speaking situation. It isn”t enough just to stand up there and speak out the information. You are not just speaking because you are only really successful when you are communicating.

And to communicate, your audience has to grasp what you are saying and be prepared to make it real in their own lives.

Movement is probably the most underused public speaking method but it is also one of the most effective. To put it bluntly, when you speak to a group, don”t just stand there. Get out of the podium and move around a bit. Walk from one side of your speaking area to the other.

Use your hands to help you describe an illustration or to gesture with emphasis toward the crowd when your text fits that kind of expression. This movement is good for you because it’’s a way of walking off your nervousness.

It’’s good for the audience because it keeps them interested. And it’’s very good for your presentation because it is a powerful way to get your point across and to assure you are being understood.

The relationship between public speaking and public performance is unmistakable. When you watch a speaker, the key word is “watch”. Taking in the presentation of a speaker is an event that brings in all of the senses.

And the more your audience actually “experiences you” rather than just hears what you say, the better they will like your presentation and the more likely they will be to agree with what you have to say or take action in the direction you had hoped they would.

Of course, it can be a nervous moment the first time you decide to step away from the podium and use your body as part of your presentation.

If you walk and move in front of people, there is always the chance an accident can happen. You could swing your arms in emphasis and knock something over. You could trip over a microphone cord and be in danger of falling down.

Or your wardrobe could malfunction because of the increased stress and that would be a horrible thing to deal with when everyone is looking at you. You can do take some extra measures to be sure your wardrobe is secure beforehand and to evaluate the speaking setting so you are aware of potential causes of accidents.

But the possibility of a mishap is just a risk that you should be prepared to take because the movement you use is so powerfully effective that the rewards are too great to pass up.

The other risk is that by stepping away from the podium, you step away from your outline. To enable yourself to wean away from having to have that outline in front of you all the time, select one or two sections where you will depart the outline and share a personal story.

Then your movement will be confident and effective. And when you can integrate confident movement into your presentation, your public speaking skills will go from good to great instantaneously.

About The Author

1000s of Education,Training,Scholarship & Children Services.Click Here -
- http://www.worldeducationpages.com, http://www.worldtrainingpages.com,
http://www.worldscholarshippages.com and http://worldchildrenpages.com

By Rachel Yoshida

With characters that range from cute to hideous, docile to aggressive, kind to vicious, and meek to brave, it is easy to see why people worldwide have gotten Pokemon fever. Pokemon is the second most successful video game-based franchise, trailing behind the Mario series, and can be found in video games, on television, on card games, clothing, and memorabilia. As of Pokemon Diamond and Pokemon Pearl, there are now 493 Pokemon, and it looks like the creators aren”t stopping! This will discuss three of the original water Pokemon. Although they are three of the original 150 Pokemon, they are still a favorite among Pokemon fans.

At Number 060 in the National Pokedex is Poliwag, a blue-skinned, round tadpole that can be found in freshwater ponds and lakes that are abundant in lily pads. They can also be found by fishing or swimming in certain areas of water. It stands at just 2” tall and weighs a small 27 pounds. Its intestines can be seen through its semitransparent skin and appears as a large swirl on its abdomen. It waddles as it walks because its legs prevent it from running fast. Naturally, Poliwag prefers to swim than to stand or walk on dry land.

When Poliwag evolves at Level 25, it transforms into Poliwhirl, the Number 061 Pokemon in the National Pokedex. Although it is evolved, it weighs 24 pounds, less than its predecessor, and stands at 3”3″. Its legs are more developed, allowing this Pokemon to live in or out of water. When it lives on land, it must maintain a slimy body by sweating continuously. Turning in the opposite direction of Poliwag, the swirl still shows through its skin and can be used in battle to cause drowsiness and induce sleep. It also has arms and what look like boxing gloves.

Poliwrath is the last stage of evolution for Poliwag and can only be evolved with the use of the water stone. Coming in at Number 062 in the National Pokedex, it is both a water and a fighting Pokemon and stands at 4”3″ and weighs 119 pounds, almost five times more than Poliwag. Poliwrath resembles Poliwhirl, except it has thicker arms, giving the impression that it is a fighter. It can easily overtake the best swimmers, both human and Pokemon, and excels at both the front crawl and the breaststroke. Its arms never get tired, no matter how long or how often it uses them and is believed to be capable of swimming the entire diameter of the Pacific Ocean.

About The Author

Rachel Yoshida is a writer in many fields.
http://www.boston-water-damage-restoration.info
http://www.chicago-water-damage-restoration.info

By kenneth kwan

These days everyone is fixing up their car to be the best it can be. Emissions laws get stricter every year; high gas prices mean keeping the engine, tires, and body in tip top shape; and the struggling economy means maintaining vehicles for as long as possible before taking out loans to purchase a new one.

One part that’’s commonly ignored, though, is the headlights. As headlights gradually get yellow and begin to droop, people don”t notice that anything’’s changing, and then suddenly there’’s a dear right in front of them that they couldn”t spot when it walked out onto the side of the road. Don”t let this happen to you!

With more and more deadly accidents caused by poor headlight maintenance, there are a few cheap things you can do that will probably dramatically improve your nighttime driving vision. First off you can try cleaning the front of your headlights yourself. There are a lot of cleaners out there that will do a remarkable job brightening up the plastic without the need to open up anything. Many police vehicles are maintained in this way.

If that’’s not enough, try taking your car into the shop and asking them to re-aim your lights. This won”t be very expensive, since it’’s quick and there are no new parts needed, and it can help the power of your lights to go farther. This process also involves cleaning out the reflectors inside the headlights, which will improve the functionality of your headlights even further.

If it comes down to it and you need new bulbs, it can be expensive. Sometimes it costs hundreds of dollars to replace headlight bulbs, which can be quite daunting. Original bulbs can be replaced with xenon lights, which go for around $10 and are much brighter.

This option can be fantastic if you need the extra brightness or the extra pocket change. And if you”re lazy, it can mean that you don”t have to worry about cleaning a thing because the xenon lights will outshine that dirt and match the quality of your original lights in their factory-fresh hay-day.

Ensuring that your headlights function properly takes a little bit of time and a little bit of money, but really the price isn”t so unreasonable. If you don”t do it, you might be paying for a whole new car, or a whole new hospital bill very soon, especially since a lot of reckless driving happens at night when people assume no one’’s going to get in their way. Don”t be roadkill, don”t make roadkill, don”t put off servicing your headlights!

About The Author

Andy’’s Auto Sport has the hottest and most stylish selections of Headlights. Click here for all of the latest styles:

http://www.andysautosport.com/projector_headlights.html

By kenneth kwan

Many people think fiberglass has a great touch quality which can resist many damages. Fiberglass is composed of plastic resin and synthetic fibers. It is made to stand up against rough situations. But, the more it is tested, the less durable it will be. The quality of any fiberglass body kits differs depending on its maker. Fiberglass body kits can either make your car an ultimately cool vehicle or it can turn it into a junk heap. It’’s all about how it was created and subsequently, how well the maintenance is.

Fiberglass is not metal. I repeat. Fiberglass is not metal. Throw away that misconception because it is not true. A car is fitted with a fiberglass exterior because it’’s light and does the job whereas a metallic exterior would drag the car down with its extra weight. Metal is obviously tougher than fiberglass (it is plastic in the end). So do not treat your fiberglass poorly because it will cost you in professional help.

Fitting in your own body kit shouldn”t be a spontaneous choice. Instead, it should be carefully thought out and mapped out because it can be highly hazardous when not done correctly. The synthetics used to make fiberglass could cause you harm for skin and the eyes. Also, any damage the fiberglass suffers makes the entire body kit more vulnerable to further damage. A small crack could potentially lead up to the necessity of an entirely new body kit.

One positive about fiberglass body kits is that it is very compliable so it can fit onto a car pretty easily. You can upgrade the style of your car any which way you look for less than $1000. That way, you can make your car unique instead of retaining the mass-produced look.

There are also other body kits which are composed of different materials. For instance, there are urethane body kits. Urethane is a much more resistant material so it’’s not likely to be smashed into little pieces after some damage has been reaped. But, since it’’s also a stronger material, it’’s also more costly and it’’s less moldable.

From a stylization point of view, you are much more limited in choice when it comes to urethane body kits. So fiberglass has both its good and bad points. Just do your homework with lots of research before you make your choice for ultimate aerodynamic, performance, and style satisfaction.

About The Author

Andy’’s Auto Sport has the hottest and most stylish selections of Body Kits. Click here for all of the latest styles:

http://www.andysautosport.com/body_kits.html

By kenneth kwan

Installing auto body kits on your vehicle can significantly upgrade your car’’s exterior. There have been cases where the auto body kit installation is so successful; it’’s difficult to discern which parts of the car is still an original piece.

Cars have also been popular, but the racer’’s sports car is garnering more attention these days thanks to the high volume audience of Nascar driving. Now, the drag racer vehicle is in great demand.

So what do you have to do in order to pick out a good body kit? First off, do your homework by reading some car magazines. They should have articles which will give you a good idea of what kinds of body kits are available. It will also give reviews about body kits from the great, to the awful, and finally to the ugly.

Body kits are definitely available on the internet. Go check out websites such as Streetbeats or JCWhitney to browse body kits so you can pick out the right one for you in the comforts of your personal PC.

Don”t body with the body kit if you do not have proper tools. It’’s not a mandate that you purchase a whole new tool kit. But, you do not want to continue with the project unless your tools are at least in good condition. Using bad or worn out tools will only compromise your vehicle’’s ability to look its best with body kits and not to mention it puts your health highly at risk.

Do not attempt to do this without safeguarding your environment so that you can perform this procedure harmlessly. By the way, do not elevate the car. This is way too dangerous for a non-professional to undertake.

At last, the actual fitting. Learn the directions well first because this is not something you want to try without having a good idea of what you”re doing. Why is this imperative? If you mess up, your car won”t look cool. Instead, it”ll look like a project of your amateur hobbies.

The last part of the procedure is to put in paint so that the body kits will match the car. More people choose to spray the entire thing rather than take it piece by piece. Just be careful that while you”re doing this, you are wary of the potential to ignite a fire and also the hazardous air quality. Just be sure to do this in a place where its well ventilated and keep in mind that you should protect yourself with a mask.

About The Author

Andy’’s Auto Sport has the hottest and most stylish selections of Body Kits. Click here for all of the latest styles:

http://www.andysautosport.com/body_kits.html

By Matthew Stanton

A full color printing is the reproduction of an image or text in color instead of the simple black and white or monochrome printing.

While there are many techniques for reproducing images in color, specific graphic processes and industrial equipment are used for mass reproduction of color images on paper. In this sense, full color printing involves reproduction techniques suited for printing presses capable of thousands or millions of impressions for publishing newspapers and magazines, brochures, cards, posters and similar mass-market items.

In this type of industrial or commercial printing, the technique used to print full-color images, such as color photographs, is referred to as four-color-process printing, because four inks are used: three primary colors plus black. The subtractive primary ink colors are cyan, a bright blue; magenta, a vivid red-purple; and yellow; which are abbreviated as CMYK.

Two graphic techniques are required to prepare images for four-color printing. In the pre-press stage, original images are translated into forms that can be used on a printing press, through color separation and screening or halftoning. These steps make possible the creation of printing plates that can transfer color impressions to paper on printing presses based on the principles of lithography.

The process of color separation starts by separating the original artwork into red, green, and blue components (for example by a digital scanner). Before digital imaging was developed, the traditional method of doing this was to photograph the image three times, using a filter for each color. Thus, the desired result is three grayscale images, which represent the red, green, and blue (RGB) components of the original image.

The next step is to invert each of these separations. When a negative image of the red component is produced, the resulting image represents the cyan component of the image. Likewise, negatives are produced of the green and blue components to produce magenta and yellow separations, respectively. This is done because cyan, magenta, and yellow are subtractive primaries which each represent two of the three additive primaries (RGB) after one additive primary has been subtracted from white light.

Todays digital printing methods do not have the restriction of a single color space that traditional CMYK processes do. Many presses can print from files that were ripped with images using either RGB or CMYK modes. The color reproduction abilities of a particular color space can vary; the process of obtaining accurate colors within a color model is called color matching.

Currently, there is also an emerging method of full color printing or aptly known as six-color process printing, which adds orange and green to the traditional CMYK inks for a larger and more vibrant color range. Unfortunately, such alternate color systems still rely on color separation, halftoning and lithography to produce printed images.

Color printing can also involve as few as one color ink, or multiple color inks which are not the primary colors. Using a limited number of color inks, or specific color inks in addition to the primary colors, is referred to as spot color printing. Generally, spot-color inks are specific formulations that are designed to print alone, rather than to blend with other inks on the paper to produce various hues and shades.

The range of available spot color inks, much like paint, is nearly unlimited, and much more varied than the colors that can be produced by four-color-process printing. Spot-color inks range from subtle pastels to intense fluorescents to reflective metallics.

A full color printing involves a series of steps, or transformations that can generate quality color reproduction for any printed material needed.

About The Author

Matthew Stanton writes an article about Full Color Printing and how it can be helpful to any business especially in the layouts or presentations of their paper documents. Simply visit this website at http://www.myprintshoponline.com/stationery.html

By Francis Hesse

Bad breath can present a lot of problems in ones life. If you suffer from bad breath, there are a lot of things in life that you are can not enjoy, like close contact with a loved one and even the taste of your food. Bad breath remedies are available for anyone that wants to cure their chronic bad breath, and if you are one of those people who either cannot afford to visit a doctor or refuse to visit a doctor about having bad breath, here are some remedies that you can use at home to help you deal with your bad breath.

Back To Basics: Brushing and Flossing

The number one bad breath remedy is obviously, to take good care of your teeth. If you can not do this, then you probably do not really want to cure your bad breath because neglecting your teeth is the number one cause of bad breath anywhere. So, your first remedy for curing your bad breath would be starting with good oral hygines.

Lemons, Fennel And The Avocado

Lemons have antioxidants that can dilute strong smells and help in the bad breath elimination process. Gargling with lemon and water can also be done not just when you are brushing your teeth but anytime of the day. Lemons are prolific, lemons are a renewable resource.

Fennel along with dill and cardamom spices also have breath heightening results. Fennel is very good for refreshing the mouth and for treating bad breath. Use a few fennel seeds after each meal.

Avocado is one of the lesser known bad breath remedies. Eating avocado can help to ease chronic bad breath.It is not difficult to get rid of bad breath with avocado and it is easily found in the produce aisle of any grocery store.

Bad Breath And Protein

Proteins is a culprit when it comes to chronic bad breath. Eat less protein and more fruits and vegetables and you will see an increase in the number of people that are coming closer to you. Being one of the most popular bad breath home remedies out there, eating properly will reduce your bad breath.

Bad Breath And Dry Mouth

If you drink enough water, you can easily cure your bad breath. Having a dry mouth leads to bad breath and of the more common bad breath remedies water is one of the biggest ones. You can drink water out of a glass or eat fruits and vegetables, as they are packed with the water and is a good bad breath remedy.

About The Author

Francis Hesse will help you find all you need to become a proficiant speed reader.

http://speedreadreview.com